99% <10nm Nanodiamond Powders Abrasive Nano Diamond

Tlhaloso e Khutšoanyane:

Nano diamond phofo e na le litšobotsi tse peli tsa nano-particles le lisebelisoa tse thata haholo.U sebelisa tšobotsi ena, e ka sebelisoa ho etsa rabara e matlafalitsoeng le resin e matlafalitsoeng.Kopo ke ho ntlafatsa conductivity ea mocheso oa thepa, mocheso oa polymer degradation, matla le ho roala ho hanyetsa, joalo-joalo Karolo e totobetse, e le hore nano-diamond e na le menyetla e pharaletseng ea tsoelo-pele tšimong ea lisebelisoa tse ncha tse kopantsoeng.


Lintlha tsa Sehlahisoa

Bohloeki bo Phahameng ba Nanodiamond Powders ho Abrasives

Lebitso la ntho Lihlahisoa tsa Nanodiamond
MF C
Bohloeki(%) 99%
Ponahalo Phofo e Bohlooho
Boholo ba likaroloana <10nm, 30-50nm, 80-100nm
Sephutheloana 10gphofo ea daemaneka mokotleng o khethehileng kapa kamoo ho hlokahalang.
Maemo a Kereiti Kereiti ea indasteri, Kereiti ea Reagent

Kopoeaphofo ea daemane:

1.Moemeli oa polishing, E khethehileng bakeng sa li-ceramics tse ntle, li-chips tsa potoloho tse kopantsoeng, lehakoe, hlooho ea ferrite, poleiti ea quartz, alloy e thata, lense ea optical.

2.boima bo phahameng le khanyetso e phahameng ea ho roala ha plating le ho se be le motlakase;

3.Boima bo phahameng le ho roala holimo ho manganga lisebelisoa tsa tšepe tse kopantsoeng;

4.Khohlano e tlase, moroalo o tlase le mojaro o mongata, sistimi e tlotsang ea bophelo bo phahameng (joalo ka mefuta eohle ea li-cylinder lubrication) le oli e tlotsang haholo.

5.Lintho tse phahameng tse thibelang ho roala le tse nang le lubricity PTFE matrix composite;

6.Hlahisa filimi ea daemane ea Polycrystalline le Piamond

7.Lisebelisoa tsa Lubricant.Nano Diamond Powders e etsa hore khohlano ea li-slide e be khohlano, e fokotsang li-coefficients tsa ho hohla, thepa e ntlafalitsoeng ea ho tlotsa le ho lelefatsa bophelo ba ts'ebeliso.

8.Bokaholimo ba plating e kopaneng le ho fafatsa bakeng sa mefuta eohle ea li-workpieces.Ho ntlafatsa liaparo tsa li-workpieces, ho hanyetsa kutu, ho hanyetsa tšusumetso le ho sebetsa ka thata holim'a metsi.

9.Lisebelisoa tsa rabara le polasetiki.Ho ntlafatsa mokhoa oa ho tsofala, ho otlolla le ho fokotsa botsofali.

10.Pholisitsoeng e ntle haholo.bokaholimo ba sesebediswa e fihla angstrom ka mor'a ho bentša, hoo e ka bang ha ho hlaha mengoapo.

Polokeloeaphofo ea daemane:

Phofo ea daemanee lokela ho kwalwa le ho bolokwa sebakeng se ommeng, se phodileng, hole le letsatsi le otlolohileng.


  • E fetileng:
  • E 'ngoe:

  • Re romelle molaetsa oa hau:

    Ngola molaetsa wa hao mona mme o re romele wona

    Re romelle molaetsa oa hau:

    Ngola molaetsa wa hao mona mme o re romele wona